TYPICAL DETAIL FOR URINAL ONE

A typical detail for a urinal refers to the standard construction and installation specifications used in architectural or plumbing design to ensure proper functionality, hygiene, and maintenance.

This detail generally includes the urinal fixture, flush valve or flushometer, water supply line, drainage connection (P-trap or concealed trap), wall backing, and mounting height.

Urinals are usually mounted at a height of 24 to 30 inches from the finished floor (measured to the rim), with lower mounting for accessibility-compliant installations (around 17 inches for ADA compliance).

The wall behind the urinal is often reinforced to support the fixture’s weight and is finished with tile or waterproof material for easy cleaning. The flush valve is typically located above the urinal, connected to a cold water supply line, while the waste line connects to the building’s sanitary drainage system, often concealed behind the wall.

Additional details may include privacy panels, venting provisions, anti-splash designs, and trap primer systems in commercial restrooms.

These details ensure that the urinal is sanitary, durable, and easy to use, and they are typically illustrated in construction drawings for accurate implementation by contractors and plumbers.

If you want to know about the staircase detail or toilet detail or miscellaneous detail, please click the link.

Image of Typical detail for a urinal detail and downloadable (in DWG) link below

TYPICAL DETAIL FOR URINAL ONE

Typical detail for a urinal detail drawing – 1

A typical detail for a urinal in a construction drawing provides a precise visual representation of how a urinal should be installed, including all relevant architectural and plumbing components.

This drawing is used by architects, engineers, and contractors to ensure the installation is done according to code, functional standards, and design intent.

Key Elements Included in a Typical Urinal Detail Drawing:

Fixture Specification:

  • The type of urinal (wall-hung, stall-type, waterless, etc.)
  • Manufacturer and model number
  • Mounting height (typically 24″ AFF for standard use, 17″ AFF for ADA compliance)

Mounting Detail:

  • Reinforced backing or blocking within the wall for secure mounting
  • Type of wall material (tile, concrete, drywall, etc.)

Water Supply Line:

  • Cold water supply connection
  • Flush valve or flushometer location and height (e.g., 44″ to 48″ AFF for manual flush valves)
  • Pipe diameter and material (e.g., 1” copper or PEX)

Waste Outlet and Trap:

  • P-trap or wall-hung concealed trap
  • Pipe diameter (typically 2”)
  • Connection to the building’s sanitary drainage system

Vent and Cleanout:

  • Vent pipe location for proper drainage and odor control
  • Access cleanout for maintenance

Floor and Wall Finishes:

  • Indication of tile or waterproof wall coverings
  • Floor slope for drainage, if required

ADA Compliance Notes (if applicable):

  • Clear floor space (30” x 48” min.)
  • Reach ranges for flush controls (maximum 48” AFF)
  • Rim height no more than 17” AFF

Additional Accessories:

  • Privacy screens or partitions
  • Splash guards or drip edges

Purpose of the Drawing:

This detail ensures all disciplines involved in the construction—plumbing, structural, and architectural—understand how the urinal integrates into the overall restroom layout. It promotes proper alignment, structural support, and code compliance (such as ADA, IPC, or UPC).


Our tips to help you improve your architectural Typical detail for a urinal detailing.



Purchase (Typical detail for a urinal detail) link below for download

error: Content is protected !!