Encasing a Hume pipe in a campus setting, particularly in architecture, involves integrating durable concrete pipes — commonly used for drainage or sewage systems — into the landscape or built environment while ensuring structural stability and aesthetic harmony.
The encasement process typically involves surrounding the pipe with concrete or other protective materials to safeguard it from external loads, weather conditions, and potential damage from landscaping or construction activities.
In architectural contexts, encased Hume pipes can be thoughtfully incorporated into the design, with creative surface treatments or landscaping elements that blend the infrastructure seamlessly into the campus environment.
Proper encasement not only enhances durability and performance but also contributes to a cleaner and more organized appearance, aligning functional infrastructure with architectural intent.
If you want to know about the kitchen detail or staircase detail or water tank detail, please click the link above.
Image of Encasing Hume pipe detail and downloadable (in DWG) link below
Encasing Hume pipe detail drawing – 1
Here’s a detailed written description of encasing a Hume pipe in construction:
Excavation and Bedding:
- Excavate a trench according to the pipe diameter, ensuring enough clearance on all sides (typically 150–300 mm).
- Provide a bedding layer of compacted sand or granular material, usually 100–150 mm thick, to support the pipe and prevent uneven settling.
Pipe Placement:
- Carefully place the Hume pipe on the prepared bedding, ensuring proper alignment and gradient for drainage flow.
- Check pipe joints and ensure proper sealing if required.
Concrete Encasement:
- Install formwork around the pipe if necessary, ensuring a minimum cover of 150 mm of concrete around the pipe.
- Use M15 or M20 grade concrete, depending on load requirements.
Reinforcement:
- Place steel reinforcement bars (rebars) around the pipe for additional structural strength, typically arranged in a cage formation with stirrups at regular intervals.
Pouring Concrete:
- Pour concrete evenly around the pipe, ensuring it flows under the pipe to avoid voids.
- Compact the concrete using vibrators for proper settling and to remove air pockets.
Curing:
- Allow the concrete to cure for at least 7 days (or as specified) to gain sufficient strength.
Backfilling:
- Backfill the trench with suitable material in layers, compacting each layer properly.
- Ensure the final surface matches the surrounding levels and apply finishing touches as needed.
Our tips to help you improve your architectural Encasing Hume pipe detailing.